Poulan PPB5500P Bedienungsanleitung PDF herunterladen (Seite 6)

6

Small Radius Tip

Reduced Kickback Symmetrical Guide Bar

Symmetrical Guide Bar

Large Radius Tip

S Low--Kickback Chain, designed with a con-

toured depth gauge and guard link which

deflect kickback force and allow wood to

gradually ride into the cutter .

L o w --- K i c k b a c k

Chain

Not a Low--- Kickback Chain

Can Obstruct Material

Contoured Depth Gauge

Elongated Guard Link

Deflects

kickback force

and allows wood

to gradually ride

into cutter

TRANSPORTING AND STORAGE

S Do not grasp or hold exposed blade.

S Stop unit before leaving work area.

S Allow unit and gearbox to cool before storing

or transporting it in a vehicle.

S Store unit and fuel in area where fuel vapors

cannot reach sparks or open flames from wa-

ter heaters, electric motors or switches, fur-

naces, etc.

S Store attachment so blade cannot accidental-

ly cause injury .

S Store attachment indoors, out of reach of chil-

dren.

If situations occur which are not covered in

this manual, use care and good judgment. If

you need assistance, call 1-800-554-6723.

SPECIAL NOTICE: Exposure to vibrations

through prolonged use of gasoline powered

hand tools could cause blood vessel or nerve

damage in the fingers, hands, and joints of

people prone to circulation disorders or abnor-

mal swellings. Prolonged use in cold weather

has been linked to blood vessel damage in

otherwise healthy people. If symptoms occur

such as numbness, pain, loss of strength,

change in skin color or texture, or loss of feeling

in the fingers, hands, or joints, discontinue the

use of this tool and seek me dical atten tion. An

anti-vibration system does not guarantee the

avoidance of these problems. Users who oper-

ate power tools on a continual and regular basis

must monitor closely their physical condition

and the condition of this unit.

SAVE THESE INSTRUCTIONS

ASSEMBLY

WARNING: If received assembled,

repeat all steps to ensure your unit is properly

assembled and all fasteners are secure.

Examine parts for damage. Do not use dam-

aged parts.

NOTE: If you need assistance or find parts

missing or damaged, call 1-800-554-6723.

TOOLS REQUIRED

S Hex wrench (provided)

INSTALL ING PRUNER ATTACH-

MENT

CAUTION:

When removing or installing at-

tachments, place the unit on a flat surface for

stability.

NOTE: The pruner attachment connects to

the engine end shaft through use of a coupler

system. For extra reach, the extension shaft

(included) can be used.

1. Loosen the couplers on the extension

shaft and on the engine end shaft by turn-

ing the knobs counterclockwise.

Attachment

Coupler

Knob

LOOSEN

TIGHTEN

2. Remove the s haft cap fr om the pruner

attachment (if present).

3. Position locking/release button of attach-

ment into guide recess of coupler on

extension shaft.

4. Push the attachment into the coupler until

the locking/release button snaps into the

primary hole.

Coupler

Primary Hole

Upper

Shaft

Locking/

Release

Button

Attachment

Guide Recess

5. Repeat steps to attach extension shaft to

coupler on engine end shaft.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare